Drop^® – сombustion catalyst

Catalyzer for combustion Drop^® is a product developed as a consequence of cutting-edge technology. Drop® enhances the major operating characteristics of automobile fuels and the combustion process in the engine. Drop® - 1% of total additive raises the octane number from 8 to 12 units, depending on the starting product.

Drop® additive has the following advantages:

• Drop® additive contains 99 percent of the main ingredient. /li>
• There is no change in the color of the gasoline.
• Low foreign particle concentration ensures a high purity grade of product.
• High resistance to oxidation during storage
• Reduces the production of tar during storage
• Petrol has a lubricating effect.

Mixing Technology of Drop® Additive and Gasoline:

The technology of mixing together of Drop^® additive and gasoline is similar to the process of mixing of all motor fuels components. However, it is important to keep in mind that density of additive is higher than density of fuels. In case of blending is insufficient, the concentration of booster in the lower part of the tank will be higher than in the upper part of the tank.

Laboratory tests of Drop^®:

Patterns of gasoline recipes:

Regular 92 + 1,3% of Drop^®= Premium 95

Premium 95 + 1,5% of Drop^®= Super 98

Premium 95 recipe (AI -95)

Weigh 400,00 gm of regular gasoline (AI-92), which is equivalent to 98,7% of total mass, and add 5,3 gm of Drop®, which is equal to 1.33% of total mass. Pour the additive carefully into the fuel and vigorously mix until it forms an uniform mass. Using motor and research methodologies, determine the octane number

Recipe of Super 98 (AI-98)

Weigh 400,00 mg of Premium gasoline (AI-98), which is equivalent to 98.5% of total mass, and 6,1 gram of Drop®, which is equal to 5% of total mass. Pour the additive carefully into the fuel and vigorously mix until it forms a uniform mass. Make an octane number examination using both motor and research approaches.

Test results of Drop^® additive